How Do I Write Policies? Edit

OPA is purpose built for reasoning about information represented in structured documents. The data that your service and its users publish can be inspected and transformed using OPA’s native query language Rego.

What is Rego?

Rego was inspired by Datalog, which is a well understood, decades old query language. Rego extends Datalog to support structured document models such as JSON.

Rego queries are assertions on data stored in OPA. These queries can be used to define policies that enumerate instances of data that violate the expected state of the system.

Why use Rego?

Use Rego for defining policy that is easy to read and write.

Rego focuses on providing powerful support for referencing nested documents and ensuring that queries are correct and unambiguous.

Rego is declarative so policy authors can focus on what queries should return rather than how queries should be executed. These queries are simpler and more concise than the equivalent in an imperative language.

Like other applications which support declarative query languages, OPA is able to optimize queries to improve performance.

The Basics

This section introduces the main aspects of Rego.

The simplest rule is a single expression and is defined in terms of a Scalar Value:

pi := 3.14159

Rules define the content of documents. We can query for the content of the pi document generated by the rule above:

> pi
3.14159

Rules can also be defined in terms of Composite Values:

rect := {"width": 2, "height": 4}

The result:

> rect
{
  "height": 4,
  "width": 2
}

You can compare two scalar or composite values, and when you do so you are checking if the two values are the same JSON value.

> rect == {"height": 4, "width": 2}
true

You can define a new concept using a rule. For example, v below is true if the equality expression is true.

v { "hello" == "world" }

If we evaluate v on its own, the REPL prints undefined because the body of the rule never evaluates to true. As a result, the document generated by the rule is not defined.

> v
undefined

Expressions that refer to undefined values are also undefined.

> v == true
undefined

We can define rules in terms of Variables as well:

t { x := 42; y := 41; x > y }

The formal syntax uses the semicolon character ; to separate expressions. Rule bodies can separate expressions with newlines and omit the semicolon:

t2 {
    x := 42
    y := 41
    x > 1
}

When evaluating rule bodies, OPA searches for variable bindings that make all of the expressions true. There may be multiple sets of bindings that make the rule body true. The rule body can be understood intuitively as:

expression-1 AND expression-2 AND ... AND expression-N

The rule itself can be understood intuitively as:

rule-name IS value IF body

If the value is omitted, it defaults to true.

When we query for the contents of t we see the obvious result:

> t
true

The order of expressions in a rule does not affect the document’s content.

s {
    x > y
    y = 41
    x = 42
}

The query result is the same:

> s
true

There’s one exception: if you use assignment := the compiler will check that the variable you are assigning has not already been used.

s {
    y := 41
    x := 42
    x > y

}

Rego References help you refer to nested documents. For example:

sites := [{"name": "prod"}, {"name": "smoke1"}, {"name": "dev"}]

r { sites[_].name == "prod" }

The rule r above asserts that there exists (at least) one document within sites where the name attribute equals "prod".

The result:

> r
true

We can generalize the example above with a rule that defines a set document instead of a boolean document:

q[name] { name := sites[_].name }

The value of q is a set of names

> q
[
  "prod",
  "smoke1",
  "dev"
]

We can re-write the rule r from above to make use of q. We will call the new rule p:

p { q["prod"] }

The result will be the same:

> p
true

Rules which have arguments can be queried with input values:

> q["smoke2"]
undefined
> s { q["dev"] }
> s
true

If you made it this far, congratulations!

This section introduced the main aspects of Rego. The rest of this document walks through each part of the language in more detail.

For a concise reference, see the Language Reference document.

Scalar Values

Scalar values are the simplest type of term in Rego. Scalar values can be Strings, numbers, booleans, or null.

Documents can be defined solely in terms of scalar values. This is useful for defining constants that are referenced in multiple places. For example:

greeting   := "Hello"
max_height := 42
pi         := 3.14159
allowed    := true
location   := null

These documents can be queried like any other:

> greeting
"Hello"
> max_height
42
> pi
3.14159
> allowed
true
> location
null

Strings

Rego supports two different types of syntax for declaring strings. The first is likely to be the most familiar: characters surrounded by double quotes. In such strings, certain characters must be escaped to appear in the string, such as double quotes themselves, backslashes, etc. See the Language Reference for a formal definition.

The other type of string declaration is a raw string declaration. These are made of characters surrounded by backticks (`), with the exception that raw strings may not contain backticks themselves. Raw strings are what they sound like: escape sequences are not interpreted, but instead taken as the literal text inside the backticks. For example, the raw string `hello\there` will be the text “hello\there”, not “hello” and “here” separated by a tab. Raw strings are particularly useful when constructing regular expressions for matching, as it eliminates the need to double escape special characters.

A simple example is a regex to match a valid Rego variable. With a regular string, the regex is "[a-zA-Z_]\\w*", but with raw strings, it becomes `[a-zA-Z_]\w*`.

Composite Values

Composite values define collections. In simple cases, composite values can be treated as constants like Scalar Values:

cube := {"width": 3, "height": 4, "depth": 5}

The result:

> cube.width
3

Composite values can also be defined in terms of Variables or References. For example:

> a := 42; b := false; c := null; d := {"a": a, "x": [b, c]}
+----+-------+------+---------------------------+
| a  |   b   |  c   |             d             |
+----+-------+------+---------------------------+
| 42 | false | null | {"a":42,"x":[false,null]} |
+----+-------+------+---------------------------+

By defining composite values in terms of variables and references, rules can define abstractions over raw data and other rules.

Sets

In addition to arrays and objects, Rego supports set values. Sets are unordered collections of unique values. Just like other composite values, sets can be defined in terms of scalars, variables, references, and other composite values. For example:

> s := {cube.width, cube.height, cube.depth}; n := count(s)
+---+---------+
| n |    s    |
+---+---------+
| 3 | [5,4,3] |
+---+---------+

Set documents are collections of values without keys. OPA represents set documents as arrays when serializing to JSON or other formats that do not support a set data type. The important distinction between sets and arrays or objects is that sets are unkeyed while arrays and objects are keyed, i.e., you cannot refer to the index of an element within a set.

When comparing sets, the order of elements does not matter:

> {1,2,3} == {3,1,2}
true

Because sets are unordered, variables inside sets must be unified with a ground value outside of the set. If the variable is not unified with a ground value outside the set, OPA will complain:

> {1,2,3} == {3,x,2}
1 error occurred: 1:1: rego_unsafe_var_error: var x is unsafe

Because sets share curly-brace syntax with objects, and an empty object is defined with {}, an empty set has to be constructed with a different syntax:

> n := count(set())
+---+
| n |
+---+
| 0 |
+---+

Variables

Variables are another kind of term in Rego. They appear in both the head and body of rules.

Variables appearing in the head of a rule can be thought of as input and output of the rule. Unlike many programming languages, where a variable is either an input or an output, in Rego a variable is simultaneously an input and an output. If a query supplies a value for a variable, that variable is an input, and if the query does not supply a value for a variable, that variable is an output.

For example:

sites := [
    {"name": "prod"},
    {"name": "smoke1"},
    {"name": "dev"}
]

q[name] { name := sites[_].name }

In this case, we evaluate q with a variable x (which is not bound to a value). As as result, the query returns all of the values for x and all of the values for q[x], which are always the same because q is a set.

> q[x]
+----------+----------+
|    x     |   q[x]   |
+----------+----------+
| "prod"   | "prod"   |
| "smoke1" | "smoke1" |
| "dev"    | "dev"    |
+----------+----------+

On the other hand, if we evaluate q with an input value for name we can determine whether name exists in the document defined by q:

> q["smoke2"]
undefined
> q["dev"]
true

Variables appearing in the head of a rule must also appear in a non-negated equality expression within the same rule. This property ensures that if the rule is evaluated and all of the expressions evaluate to true for some set of variable bindings, the variable in the head of the rule will be defined.

References

References are used to access nested documents.

The examples in this section use the data defined in the Examples section.

The simplest reference contains no variables. For example, the following reference returns the hostname of the second server in the first site document from our example data:

> sites[0].servers[1].hostname
"helium"

References are typically written using the “dot-access” style. The canonical form does away with . and closely resembles dictionary lookup in a language such as Python:

> sites[0]["servers"][1]["hostname"]
"helium"

Both forms are valid, however, the dot-access style is typically more readable. Note that there are four cases where brackets must be used:

  1. String keys containing characters other than [a-z], [A-Z], [0-9], or _ (underscore).
  2. Non-string keys such as numbers, booleans, and null.
  3. Variable keys which are described later.
  4. Composite keys which are described later.

References are always prefixed with a variable that identifies the root document. In the example above this is p. The root document may be:

  • a local variable inside a rule.
  • a rule inside the same package.
  • a document stored in OPA.
  • a documented temporarily provided to OPA as part of a transaction.

Variable Keys

References can include variables as keys. References written this way are used to select a value from every element in a collection.

The following reference will select the hostnames of all the servers in our example data:

> sites[i].servers[j].hostname
+---+---+------------------------------+
| i | j | sites[i].servers[j].hostname |
+---+---+------------------------------+
| 0 | 0 | "hydrogen"                   |
| 0 | 1 | "helium"                     |
| 0 | 2 | "lithium"                    |
| 1 | 0 | "beryllium"                  |
| 1 | 1 | "boron"                      |
| 1 | 2 | "carbon"                     |
| 2 | 0 | "nitrogen"                   |
| 2 | 1 | "oxygen"                     |
+---+---+------------------------------+

Conceptually, this is the same as the following imperative (Python) code:

def hostnames(sites):
    result = []
    for site in sites:
        for server in site.servers:
            result.append(server.hostname)
    return result

In the reference above, we effectively used variables named i and j to iterate the collections. If the variables are unused outside the reference, we prefer to replace them with an underscore (_) character. The reference above can be rewritten as:

> sites[_].servers[_].hostname
+------------------------------+
| sites[_].servers[_].hostname |
+------------------------------+
| "hydrogen"                   |
| "helium"                     |
| "lithium"                    |
| "beryllium"                  |
| "boron"                      |
| "carbon"                     |
| "nitrogen"                   |
| "oxygen"                     |
+------------------------------+

The underscore is special because it cannot be referred to by other parts of the rule, e.g., the other side of the expression, another expression, etc. The underscore can be thought of as a special iterator. Each time an underscore is specified, a new iterator is instantiated.

Under the hood, OPA translates the _ character to a unique variable name that does not conflict with variables and rules that are in scope.

Composite Keys

References can include Composite Values as keys if the key is being used to refer into a set. Composite keys may not be used in refs for base data documents, they are only valid for references into virtual documents.

This is useful for checking for the presence of composite values within a set, or extracting all values within a set matching some pattern. For example:

> s := {[1, 2], [1, 4], [2, 6]}
> s[[1, 2]]
[
  1,
  2
]
> s[[1, x]]
+---+
| x |
+---+
| 2 |
| 4 |
+---+

Multiple Expressions

Rules are often written in terms of multiple expressions that contain references to documents. In the following example, the rule defines a set of arrays where each array contains an application name and a hostname of a server where the application is deployed.

apps_and_hostnames[[name, hostname]] {
    some i, j, k
    name := apps[i].name
    server := apps[i].servers[_]
    sites[j].servers[k].name == server
    hostname := sites[j].servers[k].hostname
}

The result:

> apps_and_hostnames[x]
+----------------------+-----------------------+
|          x           | apps_and_hostnames[x] |
+----------------------+-----------------------+
| ["web","hydrogen"]   | ["web","hydrogen"]    |
| ["web","helium"]     | ["web","helium"]      |
| ["web","beryllium"]  | ["web","beryllium"]   |
| ["web","boron"]      | ["web","boron"]       |
| ["web","nitrogen"]   | ["web","nitrogen"]    |
| ["mysql","lithium"]  | ["mysql","lithium"]   |
| ["mysql","carbon"]   | ["mysql","carbon"]    |
| ["mongodb","oxygen"] | ["mongodb","oxygen"]  |
+----------------------+-----------------------+

Don’t worry about understanding everything in this example right now. There are just two important points:

  1. Several variables appear more than once in the body. When a variable is used in multiple locations, OPA will only produce documents for the rule with the variable bound to the same value in all expressions.
  2. The rule is joining the apps and sites documents implicitly. In Rego (and other languages based on Datalog), joins are implicit.

Self-Joins

Using a different key on the same array or object provides the equivalent of self-join in SQL. For example, the following rule defines a document containing apps deployed on the same site as "mysql":

same_site[apps[k].name] {
    some i, j, k
    apps[i].name == "mysql"
    server := apps[i].servers[_]
    server == sites[j].servers[_].name
    other_server := sites[j].servers[_].name
    server != other_server
    other_server == apps[k].servers[_]
}

The result:

> same_site[x]
+-------+--------------+
|   x   | same_site[x] |
+-------+--------------+
| "web" | "web"        |
| "web" | "web"        |
| "web" | "web"        |
| "web" | "web"        |
+-------+--------------+

Comprehensions

Comprehensions provide a concise way of building Composite Values from sub-queries.

Like Rules, comprehensions consist of a head and a body. The body of a comprehension can be understood in exactly the same way as the body of a rule, that is, one or more expressions that must all be true in order for the overall body to be true. When the body evaluates to true, the head of the comprehension is evaluated to produce an element in the result.

The body of a comprehension is able to refer to variables defined in the outer body. For example:

> region := "west"; names := [name | sites[i].region == region; name := sites[i].name]
+-----------------+--------+
|      names      | region |
+-----------------+--------+
| ["smoke","dev"] | "west" |
+-----------------+--------+

In the above query, the second expression contains an Array Comprehension that refers to the region variable. The region variable will be bound in the outer body.

When a comprehension refers to a variable in an outer body, OPA will reorder expressions in the outer body so that variables referred to in the comprehension are bound by the time the comprehension is evaluated.

Comprehensions are similar to the same constructs found in other languages like Python. For example, we could write the above comprehension in Python as follows:

# Python equivalent of Rego comprehension shown above.
names = [site.name for site in sites if site.region == "west"]

Comprehensions are often used to group elements by some key. A common use case for comprehensions is to assist in computing aggregate values (e.g., the number of containers running on a host).

Array Comprehensions

Array Comprehensions build array values out of sub-queries. Array Comprehensions have the form:

[ <term> | <body> ]

For example, the following rule defines an object where the keys are application names and the values are hostnames of servers where the application is deployed. The hostnames of servers are represented as an array.

app_to_hostnames[app_name] = hostnames {
    app := apps[_]
    app_name := app.name
    hostnames := [hostname | name := app.servers[_]
                            s := sites[_].servers[_]
                            s.name == name
                            hostname := s.hostname]
}

The result:

> app_to_hostnames[app]
+-----------+------------------------------------------------------+
|    app    |                app_to_hostnames[app]                 |
+-----------+------------------------------------------------------+
| "web"     | ["hydrogen","helium","beryllium","boron","nitrogen"] |
| "mysql"   | ["lithium","carbon"]                                 |
| "mongodb" | ["oxygen"]                                           |
+-----------+------------------------------------------------------+

Object Comprehensions

Object Comprehensions build object values out of sub-queries. Object Comprehensions have the form:

{ <key>: <term> | <body> }

We can use Object Comprehensions to write the rule from above as a comprehension instead:

app_to_hostnames := {app.name: hostnames |
    app := apps[_]
    hostnames := [hostname |
                    name := app.servers[_]
                    s := sites[_].servers[_]
                    s.name == name
                    hostname := s.hostname]
}

The result is the same:

> app_to_hostnames[app]
+-----------+------------------------------------------------------+
|    app    |                app_to_hostnames[app]                 |
+-----------+------------------------------------------------------+
| "web"     | ["hydrogen","helium","beryllium","boron","nitrogen"] |
| "mysql"   | ["lithium","carbon"]                                 |
| "mongodb" | ["oxygen"]                                           |
+-----------+------------------------------------------------------+

Object comprehensions are not allowed to have conflicting entries, similar to rules:

> {"foo": y | z := [1, 2, 3]; y := z[_] }
"foo": eval_conflict_error: object keys must be unique

Set Comprehensions

Set Comprehensions build set values out of sub-queries. Set Comprehensions have the form:

{ <term> | <body> }

For example, to construct a set from an array:

> a := [1, 2, 3, 4, 3, 4, 3, 4, 5]
> b := {x | x = a[_]}
> b
[
  1,
  2,
  3,
  4,
  5
]

Rules

Rules define the content of Virtual Documents in OPA. When OPA evaluates a rule, we say OPA generates the content of the document that is defined by the rule.

The sample code in this section make use of the data defined in Examples.

Generating Sets

The following rule defines a set containing the hostnames of all servers:

hostnames[name] { name := sites[_].servers[_].hostname }

When we query for the content of hostnames we see the same data as we would if we queried using the sites[_].servers[_].hostname reference directly:

> hostnames[name]
+-------------+-----------------+
|    name     | hostnames[name] |
+-------------+-----------------+
| "hydrogen"  | "hydrogen"      |
| "helium"    | "helium"        |
| "lithium"   | "lithium"       |
| "beryllium" | "beryllium"     |
| "boron"     | "boron"         |
| "carbon"    | "carbon"        |
| "nitrogen"  | "nitrogen"      |
| "oxygen"    | "oxygen"        |
+-------------+-----------------+

This example introduces a few important aspects of Rego.

First, the rule defines a set document where the contents are defined by the variable name. We know this rule defines a set document because the head only includes a key. All rules have the following form (where key, value, and body are all optional):

<name> <key>? <value>? <body>?

For a more formal definition of the rule syntax, see the Language Reference document.

Second, the sites[_].servers[_].hostname fragment selects the hostname attribute from all of the objects in the servers collection. From reading the fragment in isolation we cannot tell whether the fragment refers to arrays or objects. We only know that it refers to a collections of values.

Third, the name := sites[_].servers[_].hostname expression binds the value of the hostname attribute to the variable name, which is also declared in the head of the rule.

Generating Objects

Rules that define objects are very similar to rules that define sets.

apps_by_hostname[hostname] = app {
    some i
    server := sites[_].servers[_]
    hostname := server.hostname
    apps[i].servers[_] = server.name
    app := apps[i].name
}

The rule above defines an object that maps hostnames to app names. The main difference between this rule and one which defines a set is the rule head: in addition to declaring a key, the rule head also declares a value for the document.

The result:

> apps_by_hostname["helium"]
"web"

Incremental Definitions

A rule may be defined multiple times with the same name. When a rule is defined this way, we refer to the rule definition as incremental because each definition is additive. The document produced by incrementally defined rules is the union of the documents produced by each individual rule.

For example, we can write a rule that abstracts over our servers and containers data as instances:

instances[instance] {
    server := sites[_].servers[_]
    instance := {"address": server.hostname, "name": server.name}
}

instances[instance] {
    container := containers[_]
    instance := {"address": container.ipaddress, "name": container.name}
}

If the head of the rule is same, we can chain multiple rule bodies together to obtain the same result. We don’t recommend using this form anymore.

instances[instance] {
    server := sites[_].servers[_]
    instance := {"address": server.hostname, "name": server.name}
} {
    container := containers[_]
    instance := {"address": container.ipaddress, "name": container.name}
}

An incrementally defined rule can be intuitively understood as <rule-1> OR <rule-2> OR ... OR <rule-N>.

The result:

> instances[x]
+-----------------------------------------------+-----------------------------------------------+
|                       x                       |                 instances[x]                  |
+-----------------------------------------------+-----------------------------------------------+
| {"address":"hydrogen","name":"web-0"}         | {"address":"hydrogen","name":"web-0"}         |
| {"address":"helium","name":"web-1"}           | {"address":"helium","name":"web-1"}           |
| {"address":"lithium","name":"db-0"}           | {"address":"lithium","name":"db-0"}           |
| {"address":"beryllium","name":"web-1000"}     | {"address":"beryllium","name":"web-1000"}     |
| {"address":"boron","name":"web-1001"}         | {"address":"boron","name":"web-1001"}         |
| {"address":"carbon","name":"db-1000"}         | {"address":"carbon","name":"db-1000"}         |
| {"address":"nitrogen","name":"web-dev"}       | {"address":"nitrogen","name":"web-dev"}       |
| {"address":"oxygen","name":"db-dev"}          | {"address":"oxygen","name":"db-dev"}          |
| {"address":"10.0.0.1","name":"big_stallman"}  | {"address":"10.0.0.1","name":"big_stallman"}  |
| {"address":"10.0.0.2","name":"cranky_euclid"} | {"address":"10.0.0.2","name":"cranky_euclid"} |
+-----------------------------------------------+-----------------------------------------------+

Complete Definitions

In addition to rules that partially define sets and objects, Rego also supports so-called complete definitions of any type of document. Rules provide a complete definition by omitting the key in the head. Complete definitions are commonly used for constants:

pi = 3.14159

Rego allows authors to omit the body of rules. If the body is omitted, it defaults to true.

Documents produced by rules with complete definitions can only have one value at a time. If evaluation produces multiple values for the same document, an error will be returned.

For example:

# Define user "bob" for test input.
user = "bob"

# Define two sets of users: power users and restricted users. Accidentally
# include "bob" in both.
power_users = {"alice", "bob", "fred"}
restricted_users = {"bob", "kim"}

# Power users get 32GB memory.
max_memory = 32 { power_users[user] }

# Restricted users get 4GB memory.
max_memory = 4 { restricted_users[user] }

Error:

> max_memory
max_memory: eval_conflict_error: completely defined rules must produce exactly one value

OPA returns an error in this case because the rule definitions are in conflict. The value produced by max_memory cannot be 32 and 4 at the same time.

The documents produced by rules with complete definitions may still be undefined:

> user := "johnson"  # user is not in either of the sets defined earlier.
> max_memory
undefined

In some cases, having an undefined result for a document is not desirable. In those cases, policies can use the Default Keyword to provide a fallback value.

Functions

Rego supports user-defined functions that can be called with the same semantics as Built-in Functions. They have access to both the the data Document and the input Document.

For example, the following function will return the result of trimming the spaces from a string and then splitting it by periods.

> trim_and_split(s) = x {
     t := trim(s, " ")
     x := split(t, ".")
}

> trim_and_split("   foo.bar ")
[
  "foo",
  "bar"
]

Functions may have an arbitrary number of inputs, but exactly one output. Function arguments may be any kind of term. For example, suppose we have the following function:

foo([x, {"bar": y}]) = z {
    z := {x: y}
}

The following calls would produce the logical mappings given:

Callxy
z := foo(a)a[0]a[1].bar
z := foo(["5", {"bar": "hello"}])"5""hello"
z := foo(["5", {"bar": [1, 2, 3, ["foo", "bar"]]}])"5"[1, 2, 3, ["foo", "bar"]]

If you need multiple outputs, write your functions so that the output is an array, object or set containing your results. If the output term is omitted, it is equivalent to having the output term be the literal true. That is, the function declarations below are equivalent:

f(x) {
    x == "foo"
}

f(x) = true {
    x == "foo"
}

The outputs of user functions have some additional limitations, namely that they must resolve to a single value. If you write a function that has multiple possible bindings for an output variable, you will get a conflict error:

> p(x) = y {
    y := x[_]
}
> p([1, 2, 3])
p([1, 2, 3], out): eval_conflict_error: functions must not produce multiple outputs for same inputs

It is possible in Rego to define a function more than once, to achieve a conditional selection of which function to execute:

Functions can be defined incrementally.

> p(1, x) = y {
    y := x
}
p(2, x) = y {
    y := x*4
}

> y := p(1, 2)
> y
2
> y := p(2, 2)
> y
8

A given function call will execute all functions that match the signature given. If a call matches multiple functions, they must produce the same output, or else a conflict error will occur:

> p(1, x) = y {
    y := x
}

p(x, 2) = y {
    y := x*4
}

> y := p(1, 2)
> y
eval_conflict_error: functions must not produce multiple outputs for same inputs

On the other hand, if a call matches no functions, then the result is undefined.

> p(x, 2) = y {
    y := x*4
}
> y := p(5, 2)
> y
20
> y := p(5, 3)
> y
undefined

Negation

To generate the content of a Virtual Document, OPA attempts to bind variables in the body of the rule such that all expressions in the rule evaluate to True.

This generates the correct result when the expressions represent assertions about what states should exist in the data stored in OPA. In some cases, you want to express that certain states should not exist in the data stored in OPA. In these cases, negation must be used.

For safety, a variable appearing in a negated expression must also appear in another non-negated equality expression in the rule.

OPA will reorder expressions to ensure that negated expressions are evaluated after other non-negated expressions with the same variables. OPA will reject rules containing negated expressions that do not meet the safety criteria described above.

The simplest use of negation involves only scalar values or variables and is equivalent to complementing the operator:

t {
    greeting == "hello"
    not greeting == "goodbye"
}

The result:

> t
true

Negation is required to check whether some value does not exist in a collection. That is, complementing the operator in an expression such as p[_] == "foo" yields p[_] != "foo". However, this is not equivalent to not p["foo"].

For example, we can write a rule that defines a document containing names of apps not deployed on the "prod" site:

prod_servers[name] {
    site := sites[_]
    site.name == "prod"
    name := site.servers[_].name
}

apps_in_prod[name] {
    app := apps[_]
    server := app.servers[_]
    prod_servers[server]
    name := app.name
}

apps_not_in_prod[name] {
    name := apps[_].name
    not apps_in_prod[name]
}

The result:

> apps_not_in_prod[name]
+-----------+------------------------+
|   name    | apps_not_in_prod[name] |
+-----------+------------------------+
| "mongodb" | "mongodb"              |
+-----------+------------------------+

Modules

In Rego, policies are defined inside modules. Modules consist of:

  • Exactly one Package declaration.
  • Zero or more Import statements.
  • Zero or more Rule definitions.

Modules are typically represented in Unicode text and encoded in UTF-8.

Comments

Comments begin with the # character and continue until the end of the line.

Packages

Packages group the rules defined in one or more modules into a particular namespace. Because rules are namespaced they can be safely shared across projects.

Modules contributing to the same package do not have to be located in the same directory.

The rules defined in a module are automatically exported. That is, they can be queried under OPA’s Data API provided the appropriate package is given. For example, given the following module:

package opa.examples

pi = 3.14159

The pi document can be queried via the Data API:

GET https://example.com/v1/data/opa/examples/pi HTTP/1.1

Imports

Import statements declare dependencies that modules have on documents defined outside the package. By importing a document, the identifiers exported by that document can be referenced within the current module.

All modules contain implicit statements which import the data and input documents.

Modules use the same syntax to declare dependencies on Base Documents and Virtual Documents.

package opa.examples

import data.servers

http_servers[server] {
    server := servers[_]
    server.protocols[_] == "http"
}

Similarly, modules can declare dependencies on query arguments by specifying an import path that starts with input.

package opa.examples

import input.user
import input.method

# allow alice to perform any operation.
allow { user == "alice" }

# allow bob to perform read-only operations.
allow {
    user == "bob"
    method == "GET"
}

# allows users assigned a "dev" role to perform read-only operations.
allow {
    method == "GET"
    data.roles["dev"][_] == input.user
}

Imports can include an optional as keyword to handle namespacing issues:

package opa.examples

import data.servers as my_servers

http_servers[server] {
    server := my_servers[_]
    server.protocols[_] == "http"
}

Some Keyword

The some keyword allows queries to explicitly declare local variables. Use the some keyword in rules that contain unification statements or references with variable operands if variables contained in those statements are not declared using := .

StatementExampleVariables
Unificationinput.a = [["b", x], [y, "c"]]x and y
Reference with variable operandsdata.foo[i].bar[j]i and j

For example, the following rule generates tuples of array indices for servers in the “west” region that contain “db” in their name. The first element in the tuple is the site index and the second element is the server index.

tuples[[i, j]] {
    some i, j
    sites[i].region == "west"
    server := sites[i].servers[j]    # note: 'server' is local because it's declared with :=
    contains(server.name, "db")
}

If we query for the tuples we get two results:

> tuples
[
  [
    1,
    2
  ],
  [
    2,
    1
  ]
]

Since we have declared i, j, and server to be local, we can introduce rules in the same package without affecting the result:

# Define a rule called 'i'
> i := 1
> tuples
[
  [
    1,
    2
  ],
  [
    2,
    1
  ]
]

If we had not declared i with the some keyword, introducing the i rule above would have changed the result of tuples because the i symbol in the body would capture the global value.

The some keyword is not required but it’s recommended to avoid situations like the one above where introduction of a rule inside a package could change behaviour of other rules.

With Keyword

The with keyword allows queries to programmatically specify values nested under the input Document and the data Document.

For example, given the simple authorization policy in the Imports section, we can write a query that checks whether a particular request would be allowed:

> import data.opa.examples.allow
> allow with input as {"user": "alice", "method": "POST"}
true
> allow with input as {"user": "bob", "method": "GET"}
true
> not allow with input as {"user": "bob", "method": "DELETE"}
true
> allow with input as {"user": "charlie", "method": "GET"} with data.roles as {"dev": ["charlie"]}
true
> not allow with input as {"user": "charlie", "method": "GET"} with data.roles as {"dev": ["bob"]}
true

The with keyword acts as a modifier on expressions. A single expression is allowed to have zero or more with modifiers. The with keyword has the following syntax:

<expr> with <target-1> as <value-1> [with <target-2> as <value-2> [...]]

The <target>s must be references to values in the input document (or the input document itself) or data document.

When applied to the data document, the <target> must not attempt to partially define virtual documents. For example, given a virtual document at path data.foo.bar, the compiler will generate an error if the policy attempts to replace data.foo.bar.baz.

The with keyword only affects the attached expression. Subsequent expressions will see the unmodified value. The exception to this rule is when multiple with keywords are in-scope like below:

inner = [x, y] {
    x := input.foo
    y := input.bar
}

middle = [a, b] {
    a := inner with input.foo as 100
    b := input
}

outer = result {
    result := middle with input as {"foo": 200, "bar": 300}
}

Default Keyword

The default keyword allows policies to define a default value for documents produced by rules with Complete Definitions. The default value is used when all of the rules sharing the same name are undefined.

For example:

default allow = false

allow {
    input.user == "bob"
    input.method == "GET"
}

allow {
    input.user == "alice"
}

When the allow document is queried, the return value will be either true or false.

> allow with input.user as "bob" with input.method as "POST"
false

Without the default definition, the allow document would simply be undefined for the same input.

When the default keyword is used, the rule syntax is restricted to:

default <name> = <term>

The term may be any scalar, composite, or comprehension value but it may not be a variable or reference. If the value is a composite then it may not contain variables or references.

Else Keyword

The else keyword is a basic control flow construct that gives you control over rule evaluation order.

Rules grouped together with the else keyword are evaluated until a match is found. Once a match is found, rule evaluation does not proceed to rules further in the chain.

The else keyword is useful if you are porting policies into Rego from an order-sensitive system like IPTables.

authorize = "allow" {
    input.user == "superuser"           # allow 'superuser' to perform any operation.
} else = "deny" {
    input.path[0] == "admin"            # disallow 'admin' operations...
    input.source_network == "external"  # from external networks.
} # ... more rules

In the example below, evaluation stops immediately after the first rule even though the input matches the second rule as well.

> input
{
  "path": [
    "admin",
    "exec_shell"
  ],
  "source_network": "external",
  "user": "superuser"
}
> authorize
"allow"

In the next example, the input matches the second rule (but not the first) so evaluation continues to the second rule before stopping.

> input
{
  "path": [
    "admin",
    "exec_shell"
  ],
  "source_network": "external",
  "user": "alice"
}
> authorize
"deny"

The else keyword may be used repeatedly on the same rule and there is no limit imposed on the number of else clauses on a rule.

Operators

Equality: Assignment, Comparison, and Unification

Rego supports three kinds of equality: assignment (:=), comparison (==), and unification =. Both assignment (:=) and comparison (==) are only available inside of rules (and in the REPL), and we recommend using them whenever possible for policies that are easier to read and write.

Assignment :=

The assignment operator (:=) is used to define local variables inside of a rule. Assigned variables are locally scoped to that rule and shadow global variables.

package example

x = 100

p {
    x := 1     # declare local variable 'x' and assign value 1
    x != 100   # true because 'x' refers to local variable
}

Assigned variables are not allowed to appear before the assignment in the query. For example, the following policy will not compile:

package example

p {
    x != 100
    x := 1     # error because x appears earlier in the query.
}

q {
    x := 1
    x := 2     # error because x is assigned twice.
}

Comparison ==

Comparison checks if two values are equal within a rule. If the left or right hand side contains a variable that has not been assigned a value, the compiler throws an error.

package example

p {
    x := 100
    x == 100   # true because x refers to the local variable
}

y = 100
q {
    y == 100   # true because x refers to the global variable
}

r {
    z == 100   # compiler error because y has not been assigned a value
}

Unification =

Unification (=) combines assignment and comparison. Rego will assign variables to values that make the comparison true. Unification lets you ask for values for variables that make an expression true.

# Find values for x and y that make the equality true
> [x, "world"] = ["hello", y]
+---------+---------+
|    x    |    y    |
+---------+---------+
| "hello" | "world" |
+---------+---------+
# Find values for i, j, k, m that where the site server
#    name is the same as the app server name
> sites[i].servers[j].name = apps[k].servers[m]
+---+---+---+---+
| i | j | k | m |
+---+---+---+---+
| 0 | 0 | 0 | 0 |
| 0 | 1 | 0 | 1 |
| 0 | 2 | 1 | 0 |
| 1 | 0 | 0 | 2 |
| 1 | 1 | 0 | 3 |
| 1 | 2 | 1 | 1 |
| 2 | 0 | 0 | 4 |
| 2 | 1 | 2 | 0 |
+---+---+---+---+

Best Practices for Equality

Here is a comparison of the three forms of equality.

Equality  Applicable    Compiler Errors            Use Case
--------  -----------   -------------------------  ----------------------
:=        Inside rule   Var already assigned       Assign local variable
==        Inside rule   Var not assigned           Compare values
=         Everywhere    Values cannot be computed  Express query

Best practice is to use assignment := and comparison == wherever possible. The additional compiler checks help avoid errors when writing policy, and the additional syntax helps make the intent clearer when reading policy.

Under the hood := and == are syntactic sugar for =, local variable creation, and additional compiler checks.

Comparison Operators

The following comparison operators are supported:

a  ==  b  #  `a` is equal to `b`.
a  !=  b  #  `a` is not equal to `b`.
a  <   b  #  `a` is less than `b`.
a  <=  b  #  `a` is less than or equal to `b`.
a  >   b  #  `a` is greater than `b`.
a  >=  b  #  `a` is greater than or equal to `b`.

None of these operators bind variables contained in the expression. As a result, if either operand is a variable, the variable must appear in another expression in the same rule that would cause the variable to be bound, i.e., an equality expression or the target position of a built-in function.

Built-in Functions

In some cases, rules must perform simple arithmetic, aggregation, and so on. Rego provides a number of built-in functions (or “built-ins”) for performing these tasks.

Built-ins can be easily recognized by their syntax. All built-ins have the following form:

<name>(<arg-1>, <arg-2>, ..., <arg-n>)

Built-ins usually take one or more input values and produce one output value. Unless stated otherwise, all built-ins accept values or variables as output arguments.

If a built-in function is invoked with a variable as input, the variable must be safe, i.e., it must be assigned elsewhere in the query.

Built-ins can include “.” characters in the name. This allows them to be namespaced. If you are adding custom built-ins to OPA, consider namespacing them to avoid naming conflicts, e.g., org.example.special_func.

See the Language Reference document for details on each built-in function.

Example Data

The rules below define the content of documents describing a simplistic deployment environment. These documents are referenced in other sections above.

sites = [
    {
        "region": "east",
        "name": "prod",
        "servers": [
            {
                "name": "web-0",
                "hostname": "hydrogen"
            },
            {
                "name": "web-1",
                "hostname": "helium"
            },
            {
                "name": "db-0",
                "hostname": "lithium"
            }
        ]
    },
    {
        "region": "west",
        "name": "smoke",
        "servers": [
            {
                "name": "web-1000",
                "hostname": "beryllium"
            },
            {
                "name": "web-1001",
                "hostname": "boron"
            },
            {
                "name": "db-1000",
                "hostname": "carbon"
            }
        ]
    },
    {
        "region": "west",
        "name": "dev",
        "servers": [
            {
                "name": "web-dev",
                "hostname": "nitrogen"
            },
            {
                "name": "db-dev",
                "hostname": "oxygen"
            }
        ]
    }
]

apps = [
    {
        "name": "web",
        "servers": ["web-0", "web-1", "web-1000", "web-1001", "web-dev"]
    },
    {
        "name": "mysql",
        "servers": ["db-0", "db-1000"]
    },
    {
        "name": "mongodb",
        "servers": ["db-dev"]
    }
]

containers = [
    {
        "image": "redis",
        "ipaddress": "10.0.0.1",
        "name": "big_stallman"
    },
    {
        "image": "nginx",
        "ipaddress": "10.0.0.2",
        "name": "cranky_euclid"
    }
]